• Designed and tested 4-layer mixed-signal evaluation boards in Altium Designer, validating low-noise analog signal conditioning paths.
• Executed automated signal integrity and power-rail transient ripple measurements using high-bandwidth digital oscilloscopes.

• Facilitated weekly hardware lab sessions for 75+ students on AC/DC circuit analysis, op-amp filters, and oscilloscope diagnostics.
• Guided students in schematic capture, SPICE simulation, and hands-on SMD soldering and PCB rework techniques.

• Engineered motor drive circuitry and sensor interface boards with STM32 ARM Cortex-M4 microcontroller running FreeRTOS.
• Integrated 2D LiDAR scanner and wheel encoders over UART and SPI for real-time obstacle avoidance and indoor SLAM mapping.

• Implemented 8-band configurable FIR digital audio equalizer in Verilog HDL on Xilinx Artix-7 FPGA.
• Interfaced 24-bit I2S audio codec running at 48 kHz sampling frequency, achieving sub-millisecond audio processing latency.

Hardware Engineering Intern

• Designed and validated 4-layer mixed-signal PCB test fixtures in Altium Designer, reducing bench-testing setup time by 35%
• Performed signal integrity and power-rail ripple measurements across prototype microcontroller boards using digital oscilloscopes and spectrum analyzers
• Automated regression hardware-in-the-loop (HIL) tests in Python, identifying 12 critical firmware timing faults prior to pilot production release

Undergraduate Research Assistant – Power Electronics Lab

• Fabricated and tested 48V-to-12V synchronous buck converter prototypes achieving 94.5% peak power conversion efficiency
• Modeled dynamic thermal dissipation and transient inductor saturation limits using LTspice and MATLAB/Simulink simulations
• Characterized gate driver propagation delays using high-speed oscilloscope probing, informing revised dead-time compensation parameters

Electronics Laboratory Technician

• Maintained and calibrated RF signal generators, digital multimeters, and SMD soldering stations across 120+ student workstations
• Assisted student cohorts with SMD rework, schematic verification, and firmware debugging on STM32 ARM Cortex-M development boards
• Documented equipment calibration logs and drafted safety procedures adopted as the department standard for lab onboarding

Electrical Lead & Powertrain Engineer

• Directed electrical sub-team of 8 students designing BMS wiring harnesses, low-voltage shutdown circuitry, and motor controller interconnects
• Integrated CAN bus telemetry logging module communicating real-time motor temperatures and cell voltages to the driver dashboard display
• Reduced wiring harness mass by 18% through routing optimization and selective use of lightweight 20 AWG shielded twisted-pair cabling

Vice President & Technical Workshop Coordinator

• Organized hands-on soldering and microcontroller workshops for 90+ engineering undergraduates, teaching schematic capture in KiCad
• Spearheaded corporate technical recruitment nights with engineering industry partners, securing $6,000 in annual student project funding
• Launched a peer mentorship program pairing 30 first-year EE students with junior and senior mentors for academic and career guidance

Associate Member

• Develop equity research skills through attending training sessions that utilize FactSet software
• Learn value and growth-based investing strategies by looking at relevant company multiples

Active Member

• Help organize meetings in order to inform members about upcoming events and generate new member ideas for recruitment
• Orchestrate events, such as a fundraiser for the Autism Society that raised over $480, to unite the UW community and spread the word about the organization

General Member

• Establish connections with graduate students and Madison-area operations technology management professionals as a mentee to receive professional advice and support
• Develop understanding of potential careers through presentations and networking events with employers

• Designed and tested 4-layer mixed-signal evaluation boards in Altium Designer, validating low-noise analog signal conditioning paths.
• Executed automated signal integrity and power-rail transient ripple measurements using high-bandwidth digital oscilloscopes.

• Facilitated weekly hardware lab sessions for 75+ students on AC/DC circuit analysis, op-amp filters, and oscilloscope diagnostics.
• Guided students in schematic capture, SPICE simulation, and hands-on SMD soldering and PCB rework techniques.

• Engineered motor drive circuitry and sensor interface boards with STM32 ARM Cortex-M4 microcontroller running FreeRTOS.
• Integrated 2D LiDAR scanner and wheel encoders over UART and SPI for real-time obstacle avoidance and indoor SLAM mapping.

• Implemented 8-band configurable FIR digital audio equalizer in Verilog HDL on Xilinx Artix-7 FPGA.
• Interfaced 24-bit I2S audio codec running at 48 kHz sampling frequency, achieving sub-millisecond audio processing latency.

• Spearheaded the design and deployment of an enterprise AI-powered analytics dashboard, increasing quarterly user retention by 35% and cutting report generation latency by 4.2x across 12,000 active daily users.
• Directed a cross-functional agile squad of 14 senior engineers and product designers, establishing continuous delivery pipelines to roll out mission-critical platform enhancements on a bi-weekly release cadence.
• Accelerated annual recurring revenue (ARR) for the primary enterprise SaaS suite by $4.2M through multi-tier pricing restructuring, automated upsell flows, and strategic enterprise API integrations.
• Conducted over 120 qualitative customer interviews and quantitative telemetry cohort analyses, championing roadmap enhancements that reduced enterprise account logo churn from 4.8% to 1.6% YoY.

• Orchestrated the end-to-end product architecture and migration roadmap for a secure data pipeline tool serving Fortune 500 clients, generating $2.1M in first-year ARR with zero data compliance breaches.
• Partnered with enterprise sales and customer engineering to architect bespoke demonstration sandboxes, lifting enterprise prospective contract conversion rates from 22% to 41% across Global 2000 prospects.
• Authored comprehensive technical requirements and sprint epics for automated schema migration tools, reducing average customer engineering turnaround times by 28% across 14 consecutive agile sprint cycles.
• Designed and executed multi-variate A/B onboarding experiments across 85,000 trial accounts, boosting 14-day product activation rates by 42% and generating over $680K in self-serve expansion pipeline.

• Spearheaded the design and deployment of an enterprise AI-powered analytics dashboard, increasing quarterly user retention by 35% and cutting report generation latency by 4.2x across 12,000 active daily users.
• Directed a cross-functional agile squad of 14 senior engineers and product designers, establishing continuous delivery pipelines to roll out mission-critical platform enhancements on a bi-weekly release cadence.
• Accelerated annual recurring revenue (ARR) for the primary enterprise SaaS suite by $4.2M through multi-tier pricing restructuring, automated upsell flows, and strategic enterprise API integrations.
• Conducted over 120 qualitative customer interviews and quantitative telemetry cohort analyses, championing roadmap enhancements that reduced enterprise account logo churn from 4.8% to 1.6% YoY.

• Orchestrated the end-to-end product architecture and migration roadmap for a secure data pipeline tool serving Fortune 500 clients, generating $2.1M in first-year ARR with zero data compliance breaches.
• Partnered with enterprise sales and customer engineering to architect bespoke demonstration sandboxes, lifting enterprise prospective contract conversion rates from 22% to 41% across Global 2000 prospects.
• Authored comprehensive technical requirements and sprint epics for automated schema migration tools, reducing average customer engineering turnaround times by 28% across 14 consecutive agile sprint cycles.
• Designed and executed multi-variate A/B onboarding experiments across 85,000 trial accounts, boosting 14-day product activation rates by 42% and generating over $680K in self-serve expansion pipeline.

Creative Producer

• Produce brand films and commercial campaigns end to end, owning creative direction, crewing, and budgets across 20+ productions per year for enterprise and agency clients.
• Build and lead cross-functional crews of directors, editors, and sound designers, holding delivery timelines steady while protecting the cinematic quality of every final cut.
• Grow retained accounts by expanding into original programming, lifting average project value 38% over two seasons.

Producer & Director

• Directed documentary shorts and social series, running pre-production, casting, and on-set direction for lean two-camera crews.
• Built post-production workflows in Premiere Pro and Resolve that cut average turnaround from three weeks to eight days.

• Directed and edited a 14-minute documentary short on night-shift harbor workers, selected for two regional film festivals.
• Shot over six weeks on a micro-budget, handling color and sound mix in-house to keep the edit on schedule.

• Series producer for a six-part series profiling local musicians, coordinating field crews across three cities.

• Directed a national brand campaign spanning broadcast, social, and in-store placements, reaching an audience of 12M.

• Architected and maintain Go microservices that process over four million payment API requests daily, cutting median response latency by 38% through query optimization, connection pooling, and Redis-backed caching of frequently accessed account data.
• Led the decomposition of a monolithic billing workflow into event-driven services on AWS using SQS and DynamoDB, reducing failed transaction retries by 22% and enabling horizontal scaling during month-end volume peaks.
• Introduced end-to-end tracing and service-level dashboards with OpenTelemetry and Grafana, shrinking mean time to detect production regressions from 45 minutes to under 10 minutes across six owned services.

• Built customer-facing analytics features with React, TypeScript, and GraphQL, transforming high-volume network data into interactive dashboards that three enterprise clients cited during renewals worth more than $600K annually.
• Designed and documented a versioned REST and GraphQL API layer consumed by twelve web and mobile products, adding automated contract tests that eliminated a recurring class of cross-team integration regressions.
• Raised frontend test coverage from 31% to 86% by introducing component-driven development with Storybook and Jest, cutting QA-reported UI defects roughly in half over two release cycles.

• Developed internal Python and Django tooling that automated weekly release-note compilation from merged pull requests, saving the operations team roughly six hours of manual work every week.
• Refactored legacy jQuery dashboard modules into reusable React components alongside senior engineers, improving load performance by 24% on the highest-traffic product marketing pages.

• Maintained fifteen departmental WordPress and Node.js websites, implementing accessible page templates and performance budgets that lifted average Lighthouse scores from the low 60s to above 90.
• Automated backups and staging deployments with GitHub Actions and Docker, reducing manual deployment errors and rollback time during content launches across academic departments.

• Built and maintain a full-stack issue tracker with offline-first synchronization used by more than 2,400 GitHub users, featuring keyboard-first workflows designed for rapid triage of large backlogs.
• Ship every release through a GitHub Actions pipeline with 92% unit and integration coverage, Docker Compose environments, and curated good-first-issue labels that onboarded 30+ external contributors.

• Wrote a cross-platform Go command-line tool that generates and audits CI/CD pipelines for popular frameworks, turning hours of hand-written configuration into a reproducible one-minute scaffold.
• Adopted by four university project teams to standardize linting, testing, and release automation, with documentation and plugin support maintained alongside the open-source community.

• Organized weekly hack nights and workshop series attended by more than 120 students each semester, coordinating guest engineers from Bay Area platform and infrastructure teams.
• Grew active membership from 40 to 160 students by launching a peer-mentorship track that paired first-time contributors with experienced open-source maintainers.

• Mentor early-career developers weekly on JavaScript, Go, and system-design fundamentals, guiding fifteen mentees through their first merged pull requests and portfolio projects.
• Review community contributions and maintain style-guide documentation that reduced first-time review cycles from five rounds to two on average.

• Developed low-power firmware for Bluetooth Low Energy (BLE) sensor modules on the CC2652R microcontroller, reducing average current draw by 28% through optimized sleep-cycle scheduling.
• Created automated Python-based regression test suites validating I2C/SPI communication protocols across 8 development board variants, cutting QA turnaround by 40%.
• Authored technical reference documentation for peripheral register configurations adopted by the downstream SDK team for 3 production-ready driver libraries.

• Designed and fabricated 2.4 GHz planar patch antenna prototypes in HFSS, achieving return loss below −18 dB across the target ISM band.
• Conducted vector network analyzer (VNA) S-parameter measurements and de-embedding calibrations for multi-port RF filter characterization.
• Co-authored a peer-reviewed conference paper on compact antenna miniaturization techniques presented at IEEE AP-S 2026.

• Led weekly recitation sections for 60+ students covering combinational and sequential logic, finite state machines, and Verilog HDL synthesis.
• Graded lab assignments involving Xilinx FPGA board bring-up, timing constraint analysis, and testbench simulation in ModelSim.

• Architected a wireless mesh sensor network using ESP32 microcontrollers and LoRa transceivers for distributed temperature, humidity, and air quality monitoring across a 500-meter campus deployment.
• Implemented MQTT publish/subscribe data pipeline streaming 200+ sensor readings per minute to an InfluxDB time-series database with Grafana dashboard visualization.
• Designed custom 2-layer PCBs in KiCad integrating LiPo battery management, voltage regulation, and reverse-polarity protection circuitry.

• Implemented a 5-stage pipelined RV32I RISC-V processor in SystemVerilog on a Xilinx Artix-7 FPGA, supporting 37 base integer instructions.
• Integrated hazard detection, data forwarding, and branch prediction logic achieving 1.2 CPI on the Dhrystone benchmark suite.
• Built a custom UART bootloader enabling program upload and real-time register inspection via serial terminal interface.

• Directed a 6-person electrical sub-team designing power distribution boards, ESC interfaces, and GPS/IMU sensor integration for a competition quadcopter.
• Implemented PID flight stabilization algorithms on an STM32F4 flight controller achieving stable hover within ±5 cm positional accuracy.

• Managed $12,000 annual club budget, allocating funds across 4 student project teams and 6 professional development events.
• Organized bi-weekly hands-on workshops on PCB design, 3D printing, and Arduino/Raspberry Pi prototyping for 100+ undergraduate members.

• Spearheaded the design and deployment of an enterprise AI-powered analytics dashboard, increasing quarterly user retention by 35% and cutting report generation latency by 4.2x across 12,000 active daily users.
• Directed a cross-functional agile squad of 14 senior engineers and product designers, establishing continuous delivery pipelines to roll out mission-critical platform enhancements on a bi-weekly release cadence.
• Accelerated annual recurring revenue (ARR) for the primary enterprise SaaS suite by $4.2M through multi-tier pricing restructuring, automated upsell flows, and strategic enterprise API integrations.
• Conducted over 120 qualitative customer interviews and quantitative telemetry cohort analyses, championing roadmap enhancements that reduced enterprise account logo churn from 4.8% to 1.6% YoY.

• Orchestrated the end-to-end product architecture and migration roadmap for a secure data pipeline tool serving Fortune 500 clients, generating $2.1M in first-year ARR with zero data compliance breaches.
• Partnered with enterprise sales and customer engineering to architect bespoke demonstration sandboxes, lifting enterprise prospective contract conversion rates from 22% to 41% across Global 2000 prospects.
• Authored comprehensive technical requirements and sprint epics for automated schema migration tools, reducing average customer engineering turnaround times by 28% across 14 consecutive agile sprint cycles.
• Designed and executed multi-variate A/B onboarding experiments across 85,000 trial accounts, boosting 14-day product activation rates by 42% and generating over $680K in self-serve expansion pipeline.

LEADERSHIP

PROJECTS

• Spearheaded the design and deployment of an enterprise AI-powered analytics dashboard, increasing quarterly user retention by 35% and cutting report generation latency by 4.2x across 12,000 active daily users.
• Directed a cross-functional agile squad of 14 senior engineers and product designers, establishing continuous delivery pipelines to roll out mission-critical platform enhancements on a bi-weekly release cadence.
• Accelerated annual recurring revenue (ARR) for the primary enterprise SaaS suite by $4.2M through multi-tier pricing restructuring, automated upsell flows, and strategic enterprise API integrations.
• Conducted over 120 qualitative customer interviews and quantitative telemetry cohort analyses, championing roadmap enhancements that reduced enterprise account logo churn from 4.8% to 1.6% YoY.

• Orchestrated the end-to-end product architecture and migration roadmap for a secure data pipeline tool serving Fortune 500 clients, generating $2.1M in first-year ARR with zero data compliance breaches.
• Partnered with enterprise sales and customer engineering to architect bespoke demonstration sandboxes, lifting enterprise prospective contract conversion rates from 22% to 41% across Global 2000 prospects.
• Authored comprehensive technical requirements and sprint epics for automated schema migration tools, reducing average customer engineering turnaround times by 28% across 14 consecutive agile sprint cycles.
• Designed and executed multi-variate A/B onboarding experiments across 85,000 trial accounts, boosting 14-day product activation rates by 42% and generating over $680K in self-serve expansion pipeline.